Cleaning Tiles & Grout
Grout is porous and if left unsealed it will allow dirt and other contaminates to become trapped below the surface, where they can’t be removed with regular mopping. Over time the dirt continues to build up making tile and grout look dark
and dirty. This dirt build-up is an excellent breeding ground for bacteria, mould and mildew. Most people don’t even think about it but mopping with a dirty mop using dirty water is the worst contributor for this dirty looking build up of contamination.
We can fully restore the natural beauty of your tile and grout using the latest cleaning technology, professional products and most importantly knowledge, to remove the dirt, grime and contaminates which have built up over the years. Different jobs require different cleaning methods.
On areas which are larger than say an average bathroom we use a high pressure, high temperature cleaning system with a spinning brush action and extraction unit along with eco friendly high tech cleaning solutions to dissolve and force the dirt out of your tile and grout.
If the staining isn’t too bad and we are able get the grout back to near its original condition, in this case we would clear seal the grout to protect it from further staining and increase its longevity.
However results depend on how long it has been dirty for, type of situation, how long since it was last sealed (if ever!) and the type of grout. If we are not able to achieve an acceptable level of cleaning Tiles and Grout , then we recommend our Colourseal service
By applying a protecting sealer we help to protect and extend the life of your tile. You will soon see a dramatic improvement in the look your tiles and grout as soon as we begin the process.
Natural Stone Tiles as well as unglazed ceramics need to have a clear sealer applied to them to protect them from staining and water penetration.
Because grout is porous if it is not sealed it absorbs liquids, dirt and dust. This contamination will cause the grout to eventually fail and break down. Sealing the grout when it is new will protect it, keep it looking new and keep the area sanitized and safe from bacteria and mould
Grout COLOUR Sealing
The Benefits of GroutPro Colourseal
• Makes your grout look like new
• Ensures uniform colour throughout
• Professional and natural finish
• Maximum stain protection available!
• Ease of maintenance & no more scrubbing
• 80+ different colours
• You can expect it to wear for to 10 years under normal conditions other than wet areas.
• Perfect for kitchens, bathroom, showers, laundries and more
Grout CLEAR Sealing
Clear Grout sealer is best applied to new grout as soon as possible after installation of ALL new grout. This ensures stain resistance and protection right from the start so that no staining has a chance to occur, this also helps with water proofing and therefore is longevity.
We use high quality, professional sealer designed to soak deep into the grout to protect it from future discoloration and staining. Once completed clear sealer will prolong the life of your grout and provide ongoing stain resistance against most contaminants for up to 5 years.
For older grout that has already become stained and dirty we recommend our Professional Colourseal Service.
TILE CLEAR Sealer
Many types of tiles are also very porous and unless sealed correctly right from the start, will begin to stain right from day one! There are many different types of penetrating sealers designed specifically for tiles and it is essential that the correct sealer is applied to ensure maximum protection of your investment.
As a GroutPro Specialists we are fully trained in identification of all tiles and knowing what sealers are required for what tiles.
To be Confident of Getting a Job Well Done, Call Seton Now
Whangaparaoa, Auckland 0932